Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

15+6? ( 21 )

How to Make Your Own Dog Mask – The Fundamentals

In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it is really very simple. All you have to do is take a cardboard cutting board and cut the cardboard http://astroturfmats.com/the-best-cheap-dog-food-finding-the-right-type-of-cheap-dog-food/ into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so that you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Be sure the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you’re done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to paste the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Be sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are flat and make sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask as your dog protection, you’ll need to do some sanding to make sure that it is secure on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.

About misafir

Leave a reply

15+6? ( 21 )